Xiaomi Mi 5S | Gold | 64GB | Refurbished | Grade New
  • Xiaomi Mi 5S | Gold | 64GB | Refurbished | Grade New
  • Xiaomi Mi 5S | Gold | 64GB | Refurbished | Grade New
  • Xiaomi Mi 5S | Gold | 64GB | Refurbished | Grade New
  • Xiaomi Mi 5S | Gold | 64GB | Refurbished | Grade New

Xiaomi Mi 5S | Gold | 64GB | Refurbished | Grade New

€290.00
Sin IVA

290.00 €

Nobody has posted a review yet
in this language
Envío:
Envío gratis a partir de 250€
Brand:
| Cod. Artículo: 000002223
Cantidad:
Envío a domicilio:
Recíbelo en 24h a través de Correos Express > Entrega estimada para envíoa a península + info
Disponibilidad:
AGOTADO | Sin Reposicion
Financiación:

Dimensiones: 70.3 x 145.6 x 8.25 mm
Peso: 145 g
SoC: Qualcomm Snapdragon 821 MSM8996 Pro
Procesador: 2x 2.15 GHz Kryo, 2x 2.0 GHz Kryo, Número de núcleos: 4
Procesador gráfico: Qualcomm Adreno 530, 624 MHz
Memoria RAM: 3 GB, 4 GB, 1866 MHz
Memoria interna: 32 GB, 64 GB, 128 GB
Pantalla: 5.15 in, IPS, 1080 x 1920 píxeles, 24 bit
Batería: 3200 mAh, Li-Polymer (de polímero de iones de litio)
Sistema operativo: MIUI V8 (Android 6.0 Marshmallow)
Cámara: 4032 x 3024 píxeles, 3840 x 2160 píxeles, 30 fps
Tarjeta SIM: Nano-SIM
Wi-Fi: a, b, g, n, n 5GHz, ac, Dual band, Wi-Fi Hotspot, Wi-Fi Direct, Wi-Fi Display
USB: 2.0, USB Type-C
Bluetooth: 4.2
Localización/Navegación: GPS, A-GPS, GLONASS, BeiDou

Brand and model

Information about the brand, model and model alias (if any) of a specific device.

Brand

Brand name of the company that manufactures the device.

Xiaomi
Model

Model name of the device.

Mi 5s
Model alias

Аlternative names, under which the model is known.

Mi5s

Design

Information about the dimensions and weight of the device, shown in different measurement units. Body materials, available colors, certifications.

Width

Information about the width, i.e. the horizontal side of the device when it is used in its standard orientation.

70.3 mm (millimeters)
7.03 cm (centimeters)
0.23 ft (feet)
2.77 in (inches)
Height

Information about the height, i.e. the vertical side of the device when it is used in its standard orientation.

145.6 mm (millimeters)
14.56 cm (centimeters)
0.48 ft (feet)
5.73 in (inches)
Thickness

Information about the thickness/depth of the device in different measurement units.

8.25 mm (millimeters)
0.83 cm (centimeters)
0.03 ft (feet)
0.32 in (inches)
Weight

Information about the weight of the device in different measurement units.

145 g (grams)
0.32 lbs (pounds)
5.11 oz (ounces)
Volume

Estimated volume of the device, calculated from the dimensions provided by the manufacturer. Applies for devices in the form of a rectangular parallelepiped.

84.44 cm³ (cubic centimeters)
5.13 in³ (cubic inches)
Colors

Information about the colors, in which the device is available in the market.

Gray
Gold
Rose-gold
Silver
Body materials

Materials used in the fabrication of the device's body.

Metal

SIM card

The Subscriber Identity Module (SIM) is used in mobile devices for storing data authenticating the subscribers of mobile services.

SIM card type

Information about the type and size (form factor) of the SIM card used in the device.

Nano-SIM (4FF - fourth form factor, since 2012, 12.30 x 8.80 x 0.67 mm)
Number of SIM cards

Information about the number of SIM cards, supported by the device.

2
Features

Information about some specific features related to the SIM card(s) of the device.

Dual SIM stand-by (Both cards are active. When one is busy, the other is not active)

Networks

A mobile (cellular) network is a radio system, which allows a large number of mobile devices to communicate with each other.

GSM

GSM (Global System for Mobile Communications) was developed to replace the analog cellular network (1G), therefore it is referred to as a 2G mobile network. It has been improved with the addition of General Packet Radio Services (GPRS) and later via the Enhanced Data rates for GSM Evolution (EDGE) technology.

GSM 850 MHz
GSM 900 MHz
GSM 1800 MHz
GSM 1900 MHz
CDMA

CDMA (Code-Division Multiple Access) is a channel access method for communications within mobile networks. Compared to other 2G and 2.5G standards like GSM and TDMA, it provides increased data transfer speeds and allows more subscribers to connect simultaneously to the network.

CDMA 800 MHz
W-CDMA

W-CDMA (Wideband Code Division Multiple Access) is an air interface used by 3G mobile networks. It is one of the three different UMTS interfaces together with the TD-SCDMA and the TD-CDMA. The standard provides faster data transfer speeds and allows more users to connect to the network simultaneously.

W-CDMA 850 MHz
W-CDMA 900 MHz
W-CDMA 1900 MHz
W-CDMA 2100 MHz
TD-SCDMA

TD-SCDMA (Time Division Synchronous Code Division Multiple Access) is a 3G standard for mobile networks. It is developed as an alternative to the W-CDMA standard in China by the Chinese Academy of Telecomunications Technology, Datang Telecom and Siemens AG, and combines TDMA and CDMA.

TD-SCDMA 1900 MHz
TD-SCDMA 2000 MHz
LTE

LTE is deemed to be the fourth generation (4G) of mobile communications technology. It has been developed by the 3GPP based on the GSM/EDGE and UMTS/HSPA technologies in order to increase the speed and capacity of wireless data networks. A further development of the technology is called LTE Advanced.

LTE 850 MHz
LTE 900 MHz
LTE 1800 MHz
LTE 2100 MHz
LTE 2600 MHz
LTE-TDD 1900 MHz (B39)
LTE-TDD 2300 MHz (B40)
LTE-TDD 2500 MHz (B41)
LTE-TDD 2600 MHz (B38)

Mobile network technologies and bandwidth

Communication between devices within mobile networks is realized via various generations of network technologies, which provide different bandwidth.

Mobile network technologies

There are several network technologies that enhance the performance of mobile networks mainly by increased data bandwidth. Information about the communication technologies supported by the device and their respective uplink and downlink bandwidth.

UMTS (384 kbit/s )
EDGE
GPRS
HSPA+
LTE Cat 12 (102.0 Mbit/s , 603.0 Mbit/s )
EV-DO Rev. A (1.8 Mbit/s , 3.1 Mbit/s )
TD-SCDMA
TD-HSDPA

Operating system

Operating system is the system software, which manages and controls the functioning of the hardware components of the device.

Operating system (OS)

Information about the operating system used by the device as well as its version.

MIUI V8 (Android 6.0 Marshmallow)

System on Chip (SoC)

A system on a chip (SoC) includes into a single chip some of the main hardware components of the mobile device.

SoC

The SoC integrates different hardware components such as the CPU, GPU, memory, peripherals, interfaces, etc., as well as software for their functioning.

Qualcomm Snapdragon 821 MSM8996 Pro
Process technology

Information about the process technology used in manufacturing the chip. The value in nanometers represents half the distance between elements that make up the CPU.

14 nm (nanometers)
CPU

CPU is the Central Processing Unit or the processor of a mobile device. Its main function is to interpret and execute instructions contained in software applications.

2x 2.15 GHz Kryo, 2x 2.0 GHz Kryo
CPU bits

The CPU bits are determined by the bit-size of the processor registers, address buses and data buses. 64-bit CPUs provide better performance than 32-bit ones, which on their part perform better than 16-bit processors.

64 bit
Instruction set

The instruction set architecture (ISA) is a set of commands used by the software to manage the CPU's work. Information about the set of instructions the processor can execute.

ARMv8-A
Level 1 cache memory (L1)

The cache memory is used by the processor in order to shorten the time needed to access data and instructions that a frequently used. The L1 (level 1) cache memory has a small volume, but operates faster than the RAM and the rest cache memory levels. If the processor does not find the data needed in L1, it continues to look for it in the L2 cache memory. In some processors the search in L1 and L2 is simultaneous.

32 KB + 32 KB (kilobytes)
Level 2 cache memory (L2)

The L2 (level 2) cache memory is slower than L1, but has a larger capacity, instead, which allows it to cache more data. Just like L1, it is much faster than the system memory (RAM). If the CPU does not find the data needed in L2, it proceeds to look for them in the L3 cache memory (if there is such) or in the RAM.

1536 KB (kilobytes)
1.5 MB (megabytes)
CPU cores

A CPU core is the processor unit, which executes software instructions. Presently, besides single-core processors, there are dual-core, quad-core, hexa-core and so on multi-core processors. They increase the performance of the device allowing the execution of multiple instructions in parallel.

4
CPU frequency

The frequency of the processor describes its clock rate in cycles per second. It is measured in Megahertz (MHz) or Gigahertz (GHz).

2150 MHz (megahertz)
GPU

GPU is a graphical processing unit, which handles computation for 2D/3D graphics applications. In mobile devices GPU is usually utilized by games, UI, video playback, etc. GPU can also perform computation in applications traditionally handled by the CPU.

Qualcomm Adreno 530
GPU frequency

The frequency is the clock rate of the graphic processor (GPU), which is measured in Megahertz (MHz) or Gigahertz (GHz).

624 MHz (megahertz)
RAM capacity

RAM (Random-Access Memory) is used by the operating system and all installed applications. Data in the RAM is lost after the device is turned off or restarted.

3 GB (gigabytes)
4 GB (gigabytes)
RAM type

Information about the type of RAM used by the device.

LPDDR4
RAM channels

Information about the number of RAM channels integrated in the SoC. More channels mean higher data transfer rates.

Double channel
RAM frequency

RAM frequency relates directly to the rate of reading/writing from/in the RAM memory.

1866 MHz (megahertz)

Storage

Every mobile device has a built-in storage (internal memory) with a fixed capacity.

Storage

Information about the capacity of the built-in storage of the device. Sometimes one and the same model may is offered in variants with different internal storage capacity.

32 GB (gigabytes)
64 GB (gigabytes)
128 GB (gigabytes)
 UFS 2.0

Display

The display of a mobile device is characterized by its technology, resolution, pixel density, diagonal length, color depth, etc.

Type/technology

One of the main characteristics of the display is its type/technology, on which depends its performance.

IPS
Diagonal size

In mobile devices display size is represented by the length of its diagonal measured in inches.

5.15 in (inches)
130.81 mm (millimeters)
13.08 cm (centimeters)
Width

Approximate width of the display

2.52 in (inches)
64.13 mm (millimeters)
6.41 cm (centimeters)
Height

Approximate height of the display

4.49 in (inches)
114.01 mm (millimeters)
11.4 cm (centimeters)
Aspect ratio

The ratio between the long and the short side of the display

1.778:1
16:9
Resolution

The display resolution shows the number of pixels on the horizontal and vertical side of the screen. The higher the resolution is, the greater the detail of the displayed content.

1080 x 1920 pixels
Pixel density

Information about the number of pixels per centimeter (ppcm) or per inch (ppi) of the display. The higher the pixel density, the more detailed and clearer is the information displayed on the screen.

428 ppi (pixels per inch)
168 ppcm (pixels per centimeter)
Color depth

The color depth of the display is also known as bit depth. It shows the number of bits used for the color components of one pixel. Information about the maximum number of colors the screen can display.

24 bit
16777216 colors
Display area

The estimated percentage of the screen area from the device's front area.

71.66 % (percent)
Other features

Information about other functions and features of the display.

Capacitive
Multi-touch
 Display manufacturer - Sharp
2.5D curved glass screen
Force Touch
Synaptics ClearForce
1500:1 contrast ratio
600 cd/m²
94% NTSC

Sensors

Different sensors measure different physical quantities and convert them into signals recognizable by the mobile device.

Sensors

Sensors vary in type and purpose. They increase the overall functionality of the device, in which they are integrated.

Proximity
Light
Accelerometer
Compass
Gyroscope
Barometer
Fingerprint
Hall
 Fingerprint sensor model - Synaptics S3331

Primary camera

The primary camera of the mobile device is usually placed at its back and is used for taking photos and recording videos.

Sensor model

Information about the manufacturer and the model of the image sensor used by the camera of the device.

Sony IMX378 Exmor RS
Sensor type

Digital cameras use image sensors for taking photos. The sensor characteristics are some of the main factors determining the quality of the camera integrated in the mobile device.

CMOS (complementary metal-oxide semiconductor)
Sensor size

Information about the dimensions of the image sensor used in the device. Usually cameras with larger sensors and less pixel density tend to provide better image quality despite the lower resolution.

6.25 x 4.65 mm (millimeters)
0.31 in (inches)
Pixel size

A smaller pixel size allows the image sensor to use more pixels thus providing better image resolution. On the other hand, this may negatively impact noise levels and decrease image quality at high ISO settings.

1.55 µm (micrometers)
0.00155 mm (millimeters)
Crop factor

Crop factor is the ratio of the dimensions of a full frame camera's sensor (36 x 24 mm, which equals the frame size of a 35 mm film) and the dimensions of the image sensor of the device. The number shown is the ratio between the diagonals of a full frame sensor (43.3 mm) and the device sensor.

5.55
ISO

ISO rating indicates the light sensitivity of the image sensor. The lower the number, the less sensitive to light the image sensor is and vice versa - higher ISO ratings indicate higher sensitivity and ability of the image sensor to work better in low light conditions.

100 - 3200
Aperture

Aperture (f-stop number) indicates the size of the lens diaphragm opening, which controls the amount of light reaching the image sensor. The lower the f-stop number, the larger the diaphragm opening is.

f/2.0
Focal length

Focal length is the distance in millimeters from the focal point of the image sensor to the optical center of the lens. A focal length, which results in the same field of view on a full-frame (35 mm) camera, is also provided.

4.73 mm (millimeters)
26.27 mm (millimeters) *(35 mm / full frame)
Flash type

Cameras of mobile devices use mainly a LED or a Xenon flash. The LED flash has a softer burst of light and in contrast to the much brighter Xenon flash, is used for recording videos as well.

Dual LED
Image resolution

One of the main characteristics of the cameras of mobile devices is their resolution, which shows the number of pixels on the horizontal and vertical dimensions of the image.

4032 x 3024 pixels
12.19 MP (megapixels)
Video resolution

Information about the maximum resolution available for shooting a video with the device.

3840 x 2160 pixels
8.29 MP (megapixels)
Video FPS

Information about the maximum number of frames per second (fps), supported by the device while recording a video at maximum resolution. Some of the main standard frame rates for recording and playing video are 24p, 25p, 30p, 60p.

30 fps (frames per second)
Features

Information about additional software and hardware features of the privamery camera, which improve its overall performance.

Autofocus
Continuous shooting
Digital zoom
Digital image stabilization
Geotagging
Panorama
HDR
Touch focus
Face detection
White balance settings
ISO settings
Exposure compensation
Self-timer
Scene mode
RAW
 Phase detection
6-element lens
720p @ 120 fps

Secondary camera

Secondary cameras are placed above the screen of the device and are usually used for video calls, gesture recognition, etc.

Sensor model

Information about the manufacturer and the model of the image sensor used by the camera of the device.

OmniVision OV4688
Sensor type

Digital cameras use image sensors for taking photos. The sensor characteristics are some of the main factors determining the quality of the camera integrated in the mobile device.

CMOS BSI (backside illumination)
Sensor size

Information about the dimensions of the image sensor used in the device. Usually cameras with larger sensors and less pixel density tend to provide better image quality despite the lower resolution.

5.44 x 3.07 mm (millimeters)
0.25 in (inches)
Pixel size

A smaller pixel size allows the image sensor to use more pixels thus providing better image resolution. On the other hand, this may negatively impact noise levels and decrease image quality at high ISO settings.

2.024 µm (micrometers)
0.002024 mm (millimeters)
Crop factor

Crop factor is the ratio of the dimensions of a full frame camera's sensor (36 x 24 mm, which equals the frame size of a 35 mm film) and the dimensions of the image sensor of the device. The number shown is the ratio between the diagonals of a full frame sensor (43.3 mm) and the device sensor.

6.93
Aperture

Aperture (f-stop number) indicates the size of the lens diaphragm opening, which controls the amount of light reaching the image sensor. The lower the f-stop number, the larger the diaphragm opening is.

f/2.0
Focal length

Focal length is the distance in millimeters from the focal point of the image sensor to the optical center of the lens. A focal length, which results in the same field of view on a full-frame (35 mm) camera, is also provided.

4.6 mm (millimeters)
31.86 mm (millimeters) *(35 mm / full frame)
Image resolution

Information about the maximum image resolution of the secondary camera. Often, the resolution of the secondary camera is lower than the one of the primary camera.

2688 x 1512 pixels
4.06 MP (megapixels)
Video resolution

Information about the maximum resolution available for shooting a video by the secondary camera.

1920 x 1080 pixels
2.07 MP (megapixels)
Video FPS

Information about the maximum number of frames per second (fps), supported by the secondary camera while recording a video at maximum resolution.

30 fps (frames per second)
 Wide-angle lens - 80°

Audio

Information about the type of speakers and the audio technologies supported by the device.

Speaker

The loudspeaker is a device, which reproduces various sounds such as ring tones, alarms, music, voice calls, etc. Information about the type of speakers the device uses.

Loudspeaker
 NXP 66T19
NXP TFA9891

Radio

The radio in a mobile device is a built-in FM radio receiver.

Radio

Information whether the device has an FM radio receiver or not.

No

Tracking/Positioning

Information about the positioning and navigation technologies supported by the device.

Tracking/Positioning

The tracking/positioning service is provided by various satellite navigation systems, which track the autonomous geo-spatial positioning of the device that supports them. The most common satellite navigation systems are the GPS and the GLONASS. There are also non-satellite technologies for locating mobile devices such as the Enhanced Observed Time Difference, Enhanced 911, GSM Cell ID.

GPS
A-GPS
GLONASS
BeiDou

Wi-Fi

Wi-Fi is a technology that provides wireless data connections between various devices within a short range.

Wi-Fi

Wi-Fi communication between devices is realized via the IEEE 802.11 standards. Some devices have the possibility to serve as Wi-Fi Hotspots by providing internet access for other nearby devices. Wi-Fi Direct (Wi-Fi P2P) is another useful standard that allows devices to communicate with each other without the need for wireless access point (WAP).

802.11a (IEEE 802.11a-1999)
802.11b (IEEE 802.11b-1999)
802.11g (IEEE 802.11g-2003)
802.11n (IEEE 802.11n-2009)
802.11n 5GHz
802.11ac (IEEE 802.11ac)
Dual band
Wi-Fi Hotspot
Wi-Fi Direct
Wi-Fi Display
 MU-MiMO

Bluetooth

Bluetooth is a standard for secure wireless data transfer between different types of devices over short distances.

Version

The technology has several versions, which improve the connection speed, range, connectivity and discoverability of the devices. Information about the Bluetooth version of the device.

4.2
Features

Bluetooth uses various profiles and protocols related to faster exchange of data, energy saving, better device discoverability, etc. Some of those supported by the device are listed here.

A2DP (Advanced Audio Distribution Profile)
LE (Low Energy)

USB

The Universal Serial Bus (USB) is an industry standard that allows different electronic devices to exchange data.

Connector type

There are several USB connector types: the Standard one, the Mini and Micro connectors, On-The-Go connectors, etc. Type of the USB connector used by the device.

USB Type-C
Version

There are several versions of the Universal Serial Bus (USB) standard: USB 1.0 (1996), the USB 2.0 (2000), the USB 3.0 (2008), etc. With each following version the rate of data transfer is increased.

2.0
Features

Тhe USB interface in mobile devices may be used for different purposes such as battery charging, using the device as a mass storage, host, etc.

Charging
Host
Mass storage
On-The-Go

Headphone jack

The headphone jack is an audio phone connector, a.k.a. an audio jack. The most widely used one in mobile devices is the 3.5 mm headphone jack.

Headphone jack

Information whether the device is equipped with a 3.5 mm audio jack.

Yes

Connectivity

Information about other important connectivity technologies supported by the devices.

Connectivity

Information about some of the most widely used connectivity technologies supported by the device.

Computer sync
OTA sync
Tethering
DLNA
NFC
VoLTE

Browser

A web browser is a software application for accessing, fetching, displaying and navigating through information on the World Wide Web.

Browser

Information about some of the features and standards supported by the browser of the device.

HTML
HTML5
CSS 3

Audio file formats/codecs

Mobile devices support various audio file formats and codecs, which respectively store and code/decode digital audio data.

Audio file formats/codecs

List of some of the most common audio file formats and codecs supported standardly by the device.

AAC (Advanced Audio Coding)
AAC+ / aacPlus / HE-AAC v1
AMR / AMR-NB / GSM-AMR (Adaptive Multi-Rate, .amr, .3ga)
AMR-WB (Adaptive Multi-Rate Wideband, .awb)
eAAC+ / aacPlus v2 / HE-AAC v2
FLAC (Free Lossless Audio Codec, .flac)
MIDI
MP3 (MPEG-2 Audio Layer II, .mp3)
OGG (.ogg, .ogv, .oga, .ogx, .spx, .opus)
WMA (Windows Media Audio, .wma)
WAV (Waveform Audio File Format, .wav, .wave)

Video file formats/codecs

Mobile devices support various video file formats and codecs, which respectively store and code/decode digital video data.

Video file formats/codecs

List of some of the most common video file formats and codecs supported standardly by the device.

3GPP (3rd Generation Partnership Project, .3gp)
AVI (Audio Video Interleaved, .avi)
DivX (.avi, .divx, .mkv)
H.263
H.264 / MPEG-4 Part 10 / AVC video
H.265 / MPEG-H Part 2 / HEVC
MKV (Matroska Multimedia Container, .mkv .mk3d .mka .mks)
MP4 (MPEG-4 Part 14, .mp4, .m4a, .m4p, .m4b, .m4r, .m4v)
VC-1
Xvid

Battery

The batteries of mobile devices differ in capacity and technology. They provide the electrical charge needed for the functioning of the devices.

Capacity

The capacity of a battery shows the maximum charge, which it can store, measured in mili-Ampere hours.

3200 mAh (milliampere-hours)
Type

The battery type is determined by its structure and more specifically, by the chemicals used in it. There are different battery types and some of the most commonly used in mobile devices are the lithium-ion (Li-Ion) and the lithium-ion polymer battery (Li-Polymer).

Li-Polymer
Charger output power

Information about the electric current (amperes) and voltage (volts) the charger outputs. The higher power output allows faster charging.

5 V (volts) / 2.5 A (amps)
9 V (volts) / 2 A (amps)
12 V (volts) / 1.5 A (amps)
Quick charge technology

Quick charge technologies differ in energy efficiency, power output, control over charging, temperatures, etc. The device, battery and charger must support one and the same charging technology to achieve faster charging times.

Qualcomm Quick Charge 3.0
Features

Information about some additional features of the device's battery.

Fast charging
Non-removable
 Battery model: BM36

Specific Absorption Rate (SAR)

The SAR rating shows the amount of electromagnetic radiation absorbed by the human body when using a mobile device, expressed in W/kg.

Head SAR (EU)

The SAR head rating shows the highest level of exposure to electromagnetic radiation measured when the device is held next to the ear in a talk position. In Europe, the SAR limit for hand-held mobile devices is set to 2 W/kg per 10 g of tissue. This standard is specified by the CENELEC, complies with the IEC standards and follows the ICNIRP Guidelines 1998.

0.768 W/kg (watts per kilogram)
Body SAR (EU)

This SAR rating shows the highest level of exposure to electromagnetic radiation measured when the device is placed at the hip level. The top SAR value for mobile devices used in Europe is limited to 2 W/kg per 10 g of tissue. This standard follows the ICNIRP Guidelines 1998 as well as the IEC standards and is determined by the CENELEC.

1.01 W/kg (watts per kilogram)

 

New product
000002223

Data sheet

MPN
MI5S
Color
Gold
Capacity(mAh)
3200
Storage capacity
64GB
Manufacturer's warranty
Otro: véase la descripción del producto
Model
Xiaomi Mi 5S
Connections
4G
Camera
12 megapíxeles
Type of memory card
MicroSD
Operating system
Android
RAM Memory
3GB
Screen size
5.15"
Processor
2x 2.15 GHz Kryo
Type of Charger
Cargador de red
Charger plug
USB
Form factor
Barra
Fast charging
Si
Plug
Tipo C
Wireless technology
Bluetooth
Connectors
Jack de 3.5mm
Type of headphones
Interno intrauriculares
Charger included
Si
Brand
Xiaomi
  • Name : 30 day return policy
  • Description

    We will send a replacement (Credit Request). We will pick up the item you wish to return within 6 days. We hope you understand that we can only accept items for return if they have not been used or tampered with. Original packaging and accessories also need to be returned along with the item.

  • Click here to get more details

8 other products in the same category: